LARKIN CK30AG
Supplier Part #: CK30AG
Reach-In Cooler, 3000btu 2F SP 115-1 C High Profile Air Coat
Product Info
Reach-In Unit Coolers
C High Profile Air Defrost Reach-In Unit Cooler
Ideal unit for refrigerated reach-ins. It mounts to the top of the refrigerator and discharges cold air against the back
wall. With this air flow pattern, the air is not blasted on the product but is diffused along the back wall and then
gently drawn across the product as it returns to the unit. Thus uniform temperatures are maintained throughout
the refrigerator. In addition, door sweating and refrigeration loss due to door opening is greatly reduced
because the air is not discharged against the doors. Opting for EC motors makes this product qualified to be
included in the E Solutions product portfolio because of increased energy efficiency and cost savings.
- Textured aluminum cabinet
- Molded Lexan® guard
- Drain fitting at 45° angle so drain can be run through bottom or back of refrigerator
- Aluminum hangers automatically space the unit to the correct distance
from the back wall - Stainless steel screws prevent rust streaks
- Room for expansion valve inside the unit
- Knockouts in sides and top plus openings in rear provide maximum
flexibility for electrical connection - Expansion valve can be mounted inside the cabinet
- Full collar aluminum fins on expanded copper tubes
- Internal junction box with pigtail leads for electrical connection
- Motors are thermally protected and permanently lubricated
- Optional coated coil available (Model CK) for enhanced protection in
corrosive environments - Sweat inlet connection standard to reduce leaks (flare connection
available as a ship loose option - Rating point: 10°F TD
- cULus Listed
- NSF Certified
Item Specifications
-
480
-
Reach-In
-
27 lbs
-
3000
-
13-3/4"
-
8-7/8" x 13-3/4" x 27-3/4"
-
115-1-60
-
2
-
60Hz
-
8-7/8"
-
27-3/4"
-
3/8"
-
2.0A
-
Shaded Pole
-
Single
-
C High Profile
-
C Profile
-
1/2"
-
115V