LARKIN LHT020X6CFM

1/2 to 6 Horsepower Air-Cooled Condensing Units

Air-Cooled Condensing units with HyperCore microchannel coil technology are ideal for convenience store, restaurant
and other commercial applications. Available with hermetic, Scroll®, or semi-hermetic compressors and indoor or outdoor models, this line is a good fit for many applications. Opting for the Beacon II Microprocessor Refrigeration System with Smart Defrost, factory-installed Smart Defrost Kit (SDK), or Variable Speed EC (VSEC) motor with Orbus Controller increases energy efficiency and qualifies this product for the E Solutions product portfolio.

• Microchannel coil technology standard on all units unless noted
• Painted steel cabinets for superior strength and corrosion protection
• Heavy-duty steel raised base with 1-1/2" legs
• Fan guards and wiring conduit on indoor models
• Suction service valves for hermetic and scroll compressors located outside
  the cabinet. Semi-hermetic compressor models have a suction valve on the
  compressor and an access fitting on the suction line entering the cabinet
• Receiver with fusible plug, liquid shutoff valve and charging port is standard
• Large electrical panel for ease of access
• Prefabricated wiring harnesses for tight crimp connections and consistent
  labeling
• Unit stays on if the hood is removed for servicing
• Sight glass is easily viewable
• Completely leak, bump and pressure tested
• Piping is laid out to minimize stress and vibration and is pre-bent to eliminate leaks
• Encapsulated, auto-reset, high and low pressure controls to eliminate leaks
  (standard on all high and medium temperature models, adjustable low pressure
  control standard on low temperature models)
• Fan is specifically matched with motor and coil to attain maximum air movement and cooling
• Motor rated for 50- and 60-cycle application
• Standard PSC motor or optional Variable Speed EC (VSEC) motor with Orbus Controller
• Wide variety of compressors including: hermetic, semi-hermetic and scroll. R-404A/507 available for both medium and low temperature applications
• Spring-mounted compressors with vibration eliminators on all 1-1/2 to 6hp semi-hermetic compressors; 1/2 to 1hp compressors are rigid mounted and have a discharge loop
• Discharge service valves come standard on all units including hermetics
• Beacon II Compatible
• cULus Listed

Beacon II Features:

• The Bea con II Microprocessor Refrigeration System with Smart Defrost and the factory-installed
  Smart Defrost Kit are E Solutions options that will optimize your savings and increase energy efficiency

Horizontal Discharge Air-Cooled Hermetic Condensing Unit - Cabinet B

• Extended/Medium Temperature Conditions @ 95°F Ambient - Suction Temps: -10°F / 20°F / 30°F
• R-404A / R-507 (208/230-1-60, 208/230-3-60): 5,830 / 14,470 / 17,490 BTUH